Summary :
Driver overran stack buffer on startup – This message typically appears when Windows loads. Driver overran stack buffer while installing Windows 10 – According to many users, this issue crops up during installation of Windows 10 and generally points to some hardware problem. It means the driver that faulted is garbage. In programmer speak it's a buffer overrun. Say the driver is calling on a kernel function. The call accepts a few parameters to know what to do. Windows 10 DRIVEROVERRANSTACKBUFFER - posted in Windows Crashes and Blue Screen of Death (BSOD) Help and Support: UPDATE: After uninstalling KIS2015 the 2016 installation did not cause a BSOD.
Driver overran stack buffer και άλλα σφάλματα bsod μπορούν να προκαλέσουν πολλά προβλήματα στον υπολογιστή σας, επομένως είναι σημαντικό να διορθώσετε αυτά τα σφάλματα το συντομότερο δυνατό. Driver verifier should be performed for a max of 48 hours, or when you have a bluescreen, whatever comes first. If driver verifier has found a violation and you can't get back into windows normally, try to boot into safe mode and reset in safe mode driver verifier, or in the troubleshooting options open command prompt and type verifier /reset.
Some users has reported that they are prompted that the system detected an overrun of a stack-based buffer for odd reasons. In this post, you will fully learn about this issue and get several possible solutions provided by MiniTool Software.
Quick Navigation :
About Stack-based Buffer Overrun Error
Stack-based buffer overrun (or stack-based buffer overflow) is a kind of bug indicating that a program writes more data to a buffer located on the stack than that is actually allocated for the buffer. It is a general programming malfunction.
This issue might happen to your driver and lead to the driver overran stack buffer blue screen of death error. But more commonly, it’s related to your applications, and once it comes up, the adjacent data on the stack might be corrupted and the program is likely to crash or operate improperly.
The stack-based buffer error has been reported by plenty of users on the forum, and a case is displayed here:
Basically, I keep getting an error and the error is this – “The system detected an overrun of a stack-based buffer in this application. This overrun could potentially allow a malicious user to gain control of this application. (c0000409)” I have a build that can run AAA games ultra, so it’s not my hardware. I’m running it off my SSD; all drivers are updated; Windows 10 64-bit is fully updated; I’ve uninstalled the game multiple times and let the cache re-download. Does anyone have any advice that could possibly give me? -- from www.reddit.com
According to the reports from the users who are experiencing the issue, the overrun of a stack-based buffer error message mainly appears in following 2 situations:
- After opening computer in Safe Mode due to the Windows running into certain problems, such as explorer.exe keeps opening.
- When trying to install the Twitch or Discord desktop applications.
you might have tried various solutions but in vain. To get rid of this issue, I collect some possible methods and put them altogether in this post. Hopefully, they could be helpful for you.
Note: If this error prevents you from accessing the apps or settings normally, you might need to boot your computer into Safe Mode and then try the following solutions. What’s more, as this issue might lead to data loss, you’d better recover the lost data before you take action to fix it.
How to Fix Overrun of a Stack-Based Buffer Issue
- Scan Your Computer for Virus or Malware
- Run SFC And DISM Command
- Clean Boot the Computer
- Perform System Restore
- Try Startup Repair
- Back up Data and Reinstall Your Windows
Fix 1: Scan Your Computer for Virus or Malware
As the error message suggests, the specific program might be running with special privileges, and give the control to a malicious user, and thus be affected by certain malicious code or program. So, it’s necessary to scan your computer for any potential virus or malware.
It’s recommended to perform the Windows Defender Offline scan and here’s how to do it:
Step 1: Right-click the Start button and choose Settings from the menu.
Step 2: Navigate to Update & Security > Windows Security.
Step 3: Click Virus & threat protection in Protection areas section of the right pane.
Step 4: When you get the Windows Defender Security Center window, click Run a new advanced scan.
Step 5: Then, choose Windows Defender Offline scan and click Scan now button.
This kind of scan will help you remove malicious software that is difficult to remove, and it requires a restart to complete the process. It takes about 15 minutes and you should wait patiently until the scanning is finished.
Fix 2: Run SFC And DISM Command
In addition, the corrupted system files or Windows image files could also lead to buffer overrun detected on your computer. To fix stack-based buffer overrun issue in this case, you can try using System File Checker (SFC) and Deployment Image Servicing and Management (DISM) utilities.
Note: As running DISM requires the internet connection, you should start computer in the Safe Mode with Networking if you cannot boot it normally.
Step 1: Press Windows + R to invoke Run dialog.
Step 2: Input cmd and press Ctrl + Shift + Enter to open Command Prompt as administrator.
Step 3: Type the command sfc /scannow and press Enter to start scanning the system files. Once any corrupted files are found, this tool will replace them with the cached copies and the scanning process will take some time. If this resolves the issue successfully, it’s fine. Otherwise, you need to continue with the next step.
Step 4: Input the following command lines and press Enter after each to execute them:
- DISM /online /Cleanup-Image / ScanHealth
- DISM /Online /Cleanup-Image /RestoreHealth
After the operation is completed successfully, exit the window and restart your computer. Then, check if the stack-based buffer overrun issue has been resolved. Besides, you can run the SFC scan again as your needs.
Fix 3: Clean Boot the Computer
It’s possible that the system might detect an overrun of a stack-based buffer if a certain third-party application which starts with the system gets corrupted or runs into problems. In this case, you can clean boot your computer to prevent all the third-party programs or services from starting with the system. To do that, just follow the instructions below:
Step 1: Press Windows + S, input msconfig and click System Configuration from the search results to open it.
Step 2: Go to Services tab, check Hide all Microsoft services and click Disable all button to stop all the third-party services.
Step 3: Switch to Startup tab and click Open Task Manager.
Step 4: Then, select a program and click Disable. Repeat the operation to other programs in the list to prevent these third-party apps from starting with the system and confirm changes.
Step 5: When you back to the System Configuration window, click Apply and OK to save the changes.
After that, restart your computer to take effect the changes and the issue should have been resolved. By the way, you can re-enable these programs one by one to find out the problematic one and then keep it disabled or remove it.
Fix 4: Perform System Restore (If Available)
If you have enabled System Protection feature to protect your computer and created a restore point at least before the stack-based buffer overrun issue occurs, perhaps you can try reverting your computer to a previous restore point to fix the problem.
Note: If you are unable to get into the Safe Mode, you can choose System Restore module directly in the Advanced Options page before going to Startup Settings.
Step 1: Type restore in the Search box and choose Create a restore point from the results.
Step 2: The System Properties windows will appear and you need to click System Restore button under System Protection tab.
Step 3: Skip the welcome page. Choose the latest restore point and click Next button.
Tip: To make sure the programs to be uninstalled or changed during the process, just click Scan for affected programs.
Step 4: You will be required to confirm the restore point in the next page. Make sure all the tasks are saved and then click Finish button to execute this operation which needs to restart your computer to apply changes.
After that, the issue should be removed hopefully.
Fix 5: Try Startup Repair
As mentioned before, if buffer overrun is detected by your system, it is possible that your computer gets frozen or cannot boot. If the above methods cannot fix the issue for you, it’s high time to try the Startup Repair.
To do that, you don’t have to start into the Safe Mode and here are 2 common options for you – perform the operation in Advanced Startup Settings or using Bootable Media. Let’s see them one by one.
Option 1: Perform Startup Repair in Advanced Startup Settings
Step 1: Forcefully shut down your computer for 3 times to enter Windows recovery environment and then click See advanced repair options.
Step 2: Go to Troubleshoot > Advanced options and choose Startup Repair.
Step 3: Then, you will be required to choose a user account and input the corresponding password. Just do as the onscreen message prompts and click Continue button.
This tool will start diagnosing your computer and fix the detected potential problems that prevent it loading properly. The repair process will take some time to complete and you should wait patiently.
During the process, a log file named SrtTrail.txt is created and saved in the directory of C:WindowsSystem32LogFilesSrt. You can check it for the detailed information of this repair.
Option 2: Perform Startup Repair Using Windows Installation Media
If you cannot access the recovery environment using the common way, you can choose to employ an installation media, such as USB bootable media.
Step 1: Burn a USB installation media using Windows 10 Media Creation Tool in a normal computer.
Step 2: Connect the bootable USB drive to the problematic device and boot from it by changing the BIOS settings.
Step 3: When you get the Windows Setup window, enter your language and other preferences and click Next button.
Step 4: Click Repair your computer to enter the recovery environment and launch Startup Repair by referring to the steps in the above content.
Fix 6: Back up Data and Reinstall Your Windows
If none of the above methods help to get rid of stack-based buffer overrun error message, you might need to reinstall Windows to make your device work normally again.
![Stack Stack](/uploads/1/1/2/0/112007933/857214348.png)
This is a last resort, as reinstalling Windows will result in data loss on the system disk. So, you have to backup or transfer the needed files in advance. If there are a large number of files you want to backup, the easiest way should be back up the entire disk. To achieve that, you can use MiniTool Partition Wizard utility.
Step 1: Register to MiniTool Partition Wizard Pro Ultimate edition with a purchased license key.
Note: If you cannot access the desktop normally, you need to create a bootable media in another normal computer. Then, boot your computer from the media and enter MiniTool recovery environment to execute the following operation.
Step 2: In the main interface, select the system disk and click Copy Disk from the left pane.
Step 3: Select the target disk to hold the backup and click Next.
Warning: All the data on the target disk will be destroyed, so make sure there’s not important data.
Step 4: Choose the Copy Options (the default setting is fine), confirm the size and location of partitions on the new disk and click Next.
Step 5: Read the information about how to boot from the destination disk and click Finish. After back to the main interface, click Apply to execute the pending operation.
Now that you have backed up the system disk, you can reinstall Windows without any worries.
To do that, you can continue using the Windows installation media you create in previous mentioned method. After entering the Setup windows, please click Install now instead of Repair your computer, and then follow the given instructions to complete the installation.
Bottom Line
Do you have any problems about this post? Or do you have any better methods to resolve the issue under our discussion? Please let us know. You can leave a message in the comment box below, or contact us via [email protected].
System Detected Stack-Based Buffer Overrun FAQ
Buffer overflow (or buffer overrun) attacks is a kind of common programming malfunction and it is part of stack smashing attack.
????What is the difference between stack overflow and buffer overflow?
The stack overflow refers to the situation that the execution stack goes beyond the space reserved for the executing program, while that buffer overflow means that a program writes data beyond the memory allocated for a buffer. The stack overflow is a specific type of buffer overflow.
Because buffer overflow can lead to some serious problems for your computer, such as system crash and even security vulnerability.
If you have a bad driver on your PC, there’s a high chance you’ll run into the Driver Overran Stack Buffer blue screen error. Many Windows users have reported encountering this bug check on Windows startup, after installing recent Windows updates or a new application or when playing a game.
The error randomly appears with the value 0x000000F7 and forces your PC to reboot to prevent permanent damage to your system. The most probable causes of this error include malware attacks, missing or outdated drivers, hardware and software conflicts, and corrupt system files. The BSOD error can cause your PC to be stuck in a restart loop, making the device unusable.
We understand how annoying this can get, and today’s post offers several fixes to get rid of the Driver Overran Stack Buffer Windows 10 BSOD.
How to Fix Driver_Overran_Stack_Buffer Blue Screen Error on Windows 10
If you can access the desktop, you can apply the following fixes normally. However, if Windows is unable to start and you can’t get to the login screen, follow the steps below to boot into Safe Mode:
- Switch on your computer, and just when Windows starts to load, hold down the “Power” button to force the PC to shut down. Repeat this step three times and then allow your computer to fully restart the fourth time.
- Windows will open the “Automatic Repair” screen where you can select options 4, 5 or 6 by pressing the corresponding keys F4, F5 or F6 on your keyboard. This restarts your PC in Safe Mode.
After you enter Safe Mode, you can apply the fixes below.
Option 1: Install the Latest Windows Updates
To ensure your PC runs smoothly, Microsoft releases regular updates to address hardware and software issues. Additionally, the updates come with security patches to protect your system from security flaws.
We highly recommend installing the latest Windows updates to keep your PC safe and avoid the blue screen errors.
To check and install Windows updates:
- Launch “Settings”, and then open Update & Security > Windows Update.
- Click the “Check for updates” button. Windows will scan for updates and install them.
If the Driver_Overran_Stack_Buffer blue screen error was due to a failed Windows update or an outdated Windows version, this should resolve the problem. If it doesn’t, try out the next options.
Option 2: Uninstall Third-Party Apps
When you experience hardware and software conflicts after installing a third-party application, uninstalling it is the first solution to get rid of the issue. To quickly uninstall a recently installed app:
- Press the Windows Key and type uninstall.
- Select “Add or remove programs” from the results to open “Apps and features” in the “Settings” app.
- Scroll down to find the third-party app you intend to uninstall and highlight it.
- Select “Uninstall”, and then click the “Uninstall” button to remove the program from your PC.
Option 3: Uninstall Problematic Drivers
Driver Overran Stack Buffer Windows 10 Hatası
An incompatible device driver is another culprit that is likely to cause the Driver Overran Stack Buffer Windows 10 BSOD. If this bug check starts to appear immediately after installing a new device driver, you should uninstall it.
To do this:
- Enter Safe Mode and press the Windows Key.
- Type device manager and launch “Device Manager” from the results.
- Identify the device you recently installed.
- Right-click the device and select “Uninstall device”.
- On the window that pops up, check the box that says, “Delete the driver software for this device”, and then select “Uninstall”.
- Restart Windows and check if you’ll run into the blue screen error.
If you do, updating your drivers could be the solution.
Option 4: Update Your Device Drivers
Generally, driver issues are known to cause blue screen of death errors. Device drivers form an essential part of the smooth running of your operating system. If a driver is missing, outdated, or corrupt, one or more hardware components won’t function properly.
To ensure your device drivers are not faulty, you need to update them. You can do this manually or automatically.
To manually update your drivers:
- Boot in Safe Mode and select “Device Manager” by right-clicking “Start”.
- Find the newly installed hardware device. Additionally, check for any device with the yellow marking.
- Right-click the device(s) and select “Update driver”.
- Choose “Search automatically for updated driver software” and wait for Windows to find the driver(s) for you.
As you can see, you will have to check all the device drivers individually, and this might take a while. There’s also a possibility that Device Manager won’t download the latest versions. To make the process easier, you need a tool that automatically scans for and identifies missing, outdated, and broken device drivers.
The Auslogics Driver Updater software automates the process, saving you the time and stress of separately searching for specific device drivers. Once the tool identifies issues with your drivers, it fixes them, thereby resolving the Driver Overran Stack Buffer Windows 10 blue screen error.
With the tool installed on your PC, you can perform regular updates and prevent future incompatibility issues.
Option 5: Run System File Checker
Sometimes, an incomplete or incorrect installation or uninstallation of an application can corrupt system files. Windows allows the use of the SFC utility tool to repair corrupted system files which could cause the Driver Overran Stack Buffer error.
To run the SFC scan:
Driver Overran Stack Buffer Windows 10 Activator
- Right-lick “Start” and choose “Command Prompt (Admin)”.
- Input the command sfc /scannow and press “Enter” on your keyboard. This process takes a few minutes, and the SCF scan tool will try to find the solution.
- Restart your PC and check if the blue screen error will appear.
If this doesn’t resolve the issue, move on to the next option.
Option 6: Run the Check Disk Utility
Corrupt hard drives can also cause the DRIVER_OVERRAN_STACK_BUFFER error. Using the Check Disk utility tool to check for and fix hard drive issues may help resolve the blue screen error.
To run Check Disk:
- Right-click “Start” and select “Command Prompt (Admin)”.
- Type in the command chkdsk /r and press “Enter”.
- If you see the “Chkdsk cannot run because the volume is in use by another process. Would you like to schedule this volume to be checked the next time the system restarts> (Y/N)” message, type Y and hit “Enter”.
- Close Command Prompt. Next time you restart, the system will run Check Disk.
Option 7: Scan Your System for Malware Infections
Earlier, we mentioned malware attacks as one of the possible causes of blue screen errors. A malicious file can delete, rename or change the location of a system file, causing the Driver Overran Stack Buffer BSOD. The smart move is to perform a full system scan to remove the virus.
No tool does this better than Auslogics Anti-Malware. This program specializes in identifying the most notorious viruses and removes them before they infect your computer. New threats are released daily, but with this tool, you have full protection 24 hours a day.
The best thing about the Auslogics Anti-Malware tool is that you can use it alongside your antivirus without conflicts. The behavior-based technique allows the program to detect programs that appear innocent while silently attacking your computer.
The real-time feature runs in the background, making it difficult for malware to penetrate your system. If Windows Defender fails to detect a malicious file or application, you can be sure Auslogics Anti-Malware will stop the threat from spreading to other programs.
After installing the tool, select “Deep scan” and apply the recommended fixes. This should get rid of the driver overran stack buffer Windows 10 BSOD.
Option 8: Run Windows Memory Diagnostic Tool
If your PC’s RAM (Random Access Memory) is corrupt, you may experience frequent crashes, reboots or beeping sound on Windows startup. If you’ve recently expanded your memory, try disconnecting it to check if this resolves the issue.
If you haven’t added new memory, you need to run the diagnostic test to check for memory failures and errors with your RAM.
To run the Windows Memory Diagnostic tool:
- Press the Windows Key and type memory.
- Select “Windows Memory Diagnostic”.
- Choose one of the two options: “Restart now and check for problems (recommended)” or “Check for problems the next time I start my computer”.
- If you select the first option, make sure to save all your files and close all running programs. The process may take a while, and you’ll see the progress bar during the diagnostic tests.
If the Windows Memory Diagnostic tool finds memory corruption, it could be the likely cause of the Driver_Overran_Stack_Buffer blue screen error. Your best option is to replace the bad memory to resolve the problem.
Option 9: Perform System Restore
System Restore is a useful Windows feature that allows users to roll back recent changes that are causing PC issues. For this functionality to work, you need to have created a restore point prior to the Driver Overran Stack Buffer Windows 10 BSOD.
To restore your system to an earlier point when the PC was running smoothly:
- Press the Windows Key and type recovery.
- Click “Recovery” from the results to open the “Recovery” window in Control Panel.
- Choose “Open System Restore” and click “Next”.
- Find the most recent restore point and select it. Alternatively, you can check the box that says, “Show more restore points”, and select your preferred choice. To know which programs will be deleted and restored, click “Scan for affected programs”.
- Click “Next” and then select “Finish”.
- Save all your work and close all running applications because this process will restart your system to apply the changes.
System Restore should get rid of the Driver Overran Stack Buffer Windows 10 blue screen error.
Hopefully, you’ll find the solution to the blue screen error. For any questions or further assistance, you’re welcome to leave a comment below.